Yes, the Fulton Fold Away Bolt On Hinge Kit item # FHDPB230101 will work for your trailer. According to Fulton you will need to fabricate a metal or steel spacer as a shim to fill the gap between the tongue and the hinge. view full answer...
I contacted my tech contact at Bulldog Winch and he told me the Custom-Fit Steel Winch Mount # BDW15175 is confirmed to fit on your 2016 590i John Deere Gator XUV. I attached a review video of this winch mount you may want to check out.
If you are in need of a winch, I recommend the Bulldog Winch 1.9 HP Powersports Winch # BDW15022. This winch has a weight capacity of 6,000 lbs. This winch has a permanent magnet motor and uses a 50' wire rope. The handheld remote cable is 15' long and... view full answer...
Since what you have currently on your 1990 Fleetwood Southwind is a Kwikee 32 step the Lippert Kwikee 32 powered step part # LC372261 that you referenced would be the correct step for you to use. view full answer...
The Wheel Liners confirmed to fit your 1987 John Deere Motorhome are only available in the complete front and rear package # NA7195D0. You may also want the Wheel Masters Tire Pressure Valve Extenders - Straight - 2" Long - Qty 2 # WM80292 to allow you to access the inflation valves easier. view full answer...
In order to install a quick connect winch wiring harness on both the front and rear of your 2016 John Deere Gator 825i, I recommend using the Bulldog Winch Wiring Kit part # BDW20205. You will need 2 harnesses, 1 for the front of the ATV and 1 for the rear of the ATV.
The harness wires directly to your battery and can support winches up to 95 amps which is more than enough for the 21 amp rating of the Superwinch Terra Series ATV Winch part # SW1145220. Each cable end on the wiring harness... view full answer...
The Bulldog Winch Powersports Series ATV Winch # BDW15014 you were looking has a sealed 250 amp contactor that acts as a solenoid, and you will use the included wiring to run from the battery of your 2014 John Deere Gator to the contactor, and then from the contactor to the winch.
I included a video of the Bulldog # BDW15014 for you to take a look at. view full answer...
To mount the etrailer ATV Winch - Synthetic Rope - Hawse Fairlead # e98988 to your 2014 John Deere Gator 825i you can use Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15171 which is custom fit for your Gator, and my contact at Bulldog confirmed it will work with the 3.18" x 3.18" mounting bolt pattern of the # e98988.
I included a video of the etrailer # e98988 for you to take a look at. view full answer...
The Hopkins Plug-In Simple Vehicle Wiring Harness # HM11140585 is designed for the following vehicles:
- 2008 - 2009 Mercury Sable
- 2008 - 2009 Ford Taurus Sedan
Since there aren't any custom fit harnesses for your 2018 John Deere Gator XUV 835 I recommend using the following universal parts:
- Curt Powered Tail Light Converter # C59236
- Deka Heat Shrink Butt Connectors # DW05744-5
The heat shrink butt connectors will be used to replace the quick-splice connectors since these... view full answer...
The correct custom winch mount for your 2011 John Deere Gator JD825i is the Bulldog Winch Mount # BDW15171. This will bolt right onto your John Deere and I verified with Bulldog that it's mounting pattern is directly compatible with the 4-bolt 3" x 6.66" pattern on your Superwinch Terra 45 SW1145220. view full answer...
Go To Results